The LMD-A170 is a 17-inch LMD-A Series LCD monitor offers Full HD resolution, along with a lightweight and compact design. There is more than a 12% to 22% reduction in mass, 30% reduction in depth, and more than 25% reduction in power consumption, compared to Sony’s previous models. The LMD-A Series offers the same user-interface design, convenient features, functions and operability as PVM-A Series OLED picture monitors. This consistency between the PVM-A and LMD-A Series brings great user benefits when both types of monitor are used in the same network. Furthermore, LMD-A Series monitors provide versatility for a wide range of user applications both in the studio and in the field. These include DC operation, VESA mount and yoke-mount holes, and an optional protection kit.

The LMD-A series offers full HD resolution, along with a lightweight and compact design. There is more than a 12% to 22% reduction in mass, 30% reduction in depth, and more than 25% reduction in power consumption, compared to Sony’s previous models. This Series also offers the same user-interface design, convenient features and functions, and operability as PVM-A Series OLED picture monitors. This consistency between the PVM-A and LMD-A Series brings great user benefits when both types of monitor are used in the same network. Furthermore, LMD-A Series monitors provide versatility for a wide range of user applications both in the studio and in the field: DC operation, VESA mount and yoke-mount holes, and an optional protection kit (LMD-A170 only).

This broad and powerful professional LCD monitor continues to meet the broadest range of application needs for excellent cost:performance picture monitoring.

• 1 x Sony PVM-A170 Sunshade 17
• 1 x V-Lock to 4-Pin XLR Battery Plate
• 1 x 5m BNC Cable
• 1 x Junior 28mm Spigot w/ M10 Thread
• 1 x 13A to IEC C14 Cable
• 1 x ARRI Low Boy Stand

Panel a-Si TFT Active Matrix LCD
Picture Size (Diagonal) 16.5 inches
Effective Picture Size (H x V) 365.8 x 205.7 mm 14 1/2 x 8 1/8 inches
Resolution (H x V) 1920 x 1080 pixels (Full HD)
Aspect 16:9
Pixel Efficiency 99.99%
Colors Approx.16.7 million colors
Viewing Angle (Panel Specification) 89°/89°/89°/89° (typical) (up/down/left/right contrast > 10:1)
Normal Scan 0% scan
Over Scan 5% over scan
Input
Composite Input BNC (x1), 1 Vp-p ±3dB, sync negative
SDI Input BNC (x2)
HDMI Input HDMI (x1) (HDCP correspondence)
Audio Input Stereo mini jack (x1), -5 dBu 47 kΩ or higher
Parallel Remote RJ-45 Modular connector 8-pin (x1)(Pin-assignable)
Serial Remote (LAN) RJ-45 (x1) (Ethernet, 10BASE-T/100BASE-TX)
DC Input XLR-type 4-pin (male) (x1), DC 12 V to 17 V (output impedance 0.05 Ω or less)
Output
Composite Output BNC (x1), Loop-through, with 75 Ω automatic terminal function
SDI Output BNC (x2), output signal amplitude: 800 mVp-p ±10%, output impedance: 75 Ω unbalanced
Audio Monitor Output Stereo mini jack (x1)
Speaker (Built-in) Output 1.0 W (Monaural)
Headphone Output Stereo mini jack (x1)
General
Power Requirements 100 V to 240 V AC, 0.5 A to 0.2 A, 50/60 Hz
DC 12 V to 17 V, 3.6 A to 2.5 A
Power Consumption Approx. 49 W (max.)
Approx. 42 W (average power consumption in the default sattus)
Inrush Current
(1) Maximum possible inrush current at initial switch-on(Voltage changes caused by manual switching):60 A peak,0.3 A r.m.s.
(240V AC)
(2) Inrush current after a mains interruption of five seconds(Voltage changes caused at zero-crossing):48 A peak,0.2 A
r.m.s.(240V AC)
Operating Temperature 0°C to 35°C (Recommended: 20°C to 30°C)
32°F to 95°F (Recommended: 68°F to 86°F)
Operating Humidity 30% to 85% (no condensation)
Storage/Transport Temperature -20°C to +60°C
-4°F to +140°F
Storage/Transport Humidity 0% to 90%
Operating/Storage/Transport Pressure 700 hPa to 1060 hPa
Dimensions (W x H x D) *1 420.2 x 288.8 x 70.0 mm (without monitor feet)