Teradek Bolt LT 750 4K Dual Receiver

ENQUIRE NOW

Teradek Bolt LT 750 4K TX/RX Wireless Transmitter and Receiver. Teradek Bolt LT 750 4K TX/RX Wireless Transmitter and Receiver. Bolt 4k LT System. Teradek’s most agile system yet, with an improved hardware chipset, increased image quality at farther ranges, and a nearly identical compact design to the previous Bolt generation. Entirely HDR. Zero delay.

  • 1 x Teradek Bolt LT 750 4K Transmitter
  • 2 x Teradek Bolt LT 750 4K Receiver
  • 3 x Short HDMI Cable (4K)
  • 3 x Coiled BNC Cable
  • 4 x 2-Pin Lemo to D-Tap Power Cable
  • 2 x 2 Pin Lemo to 2 Pin Lemo Cable
  • 2 x Mains Power Supply to 2-Pin Lemo (9V)
  • 2 x Teradek Wifi Antenna 2dBi 2.4/5.8GHz (RP-SMA)
  • 1 x USB-A to Micro USB Cable
  • 2 x 1/4″” Light Stand Adapter
  • 1 x 7″” Noga Arm
  • 1 x 11″” Noga Arm
  • 1 x Teradek Bolt 4K LT Flight Case

Bolt 4K LT 750 TX
Video
Video Inputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
1 x HDMI 1.4b Type-A receptacle
Video Outputs 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
Sdi Ancillary Data Support Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Colour Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx <0.001sec
Input Cross Conversion Yes, HDMI to SDI
Supported Resolutions
Supported Resolutions 4Kp23.98/24/25/29.97/30 (HDMI only)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p50 576p59.94/60
480i(NTSC)/576i(PAL)
Video Processing
Video Compression Visually Lossless
Color Correction None
Audio Processing
Audio Format 48kHz 24-bit PCM
Inputs
Audio Input Embedded SDI/HDMI Audio Input (2 Channel)
Physical
Dimensions 60mm x 103mm x 33mm
Weight 206g (7.3oz)
Construction Milled Aluminium (Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with 1/4″”x20 and M3 holes
Interfaces
Configuration Interfaces OSD with Menu, Joystick Navigation
Switches On/Off Switch
Mobile App Bolt App
Desktop App Bolt Manager application for OSX & Windows
USB Interface Functionality Upgrade via Micro-USB
External Control Via Bolt App
Bluetooth 2.4 GHz
Network
Antennas 2 External 2dBi antennas (included)
Wireless Non-DFS Frequencies:
5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
DFS Frequencies:
5.270 ~ 5.670 GHz
Number Of 20 Mhz Channels 25 (region dependent)
Number Of 40 Mhz Channels 13 (region dependent)
Channel Bandwidth 20MHz, 40MHz
Rf Channel Selection Auto, Manual
Encryption AES-256, RSA-1024 key exchange
Rf Power 19 dbm EIRP (2 external 2dBi antennas) (<80mW transmit power)
Rf Sensitivity 2 External 2dBi antennas (included)
Range Up to 750 ft, line of sight
Unicast Multicast Can connect one Transmitter to up to 6 Receivers
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Power
Power Input 2-Pin Circular locking Connector 6-28 VDC
Battery None, optional Sony/Canon dual battery plate
Nominal Power Consumption 9 Watts
Environmental
Operating Temperature 0-40℃
Bolt 4K 750 RX No Mount
Video
Video Outputs 2 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)
Sdi Ancillary Data Support Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx <0.001sec
Input Cross Conversion Yes, HDMI to SDI
Supported Resolutions
Supported Resolutions 4Kp23.98/24/25/29.97/30/50/59.94/60
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p50 576p59.94/60
480i(NTSC)/576i(PAL)
Video Processing
Video Compression Visually Lossless
Video Format Conversion Support Connect an HD source to the Tx and get a 4K signal out of Rx
Connect a 4K source to the Tx, get HD resolution out of Rx
You can also mix & match from a single source:
4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
Input/output configurations are controlled directly on units or via Bolt 4K app
Color Correction 17x17x17 3D LUT (supports 10-bit color)
Audio Processing
Audio Format 48kHz 24-bit PCM
Outputs
Audio Output Embedded SDI/HDMI Audio Output (2 Channel)
Physical
Dimensions 112 x 139 x 27 mm
Weight 432g (15.2 Oz)
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with 1/4″”x20 and M3 holes
Interfaces
Configuration Interfaces OSD with Menu, Joystick Navigation
Switches On/Off Switch
Usb Interface Functionality Upgrade via Micro-USB
Network
Antennas 5 External 2 dBi antennas (included) or optional Array Panel Antenna
Wireless Non-DFS Frequencies:
5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
DFS Frequencies:
5.270 ~ 5.670 GHz
Channel Bandwidth 13x 40MHz wide channels
Rf Channel Selection Auto, Manual
Manual available for non-DFS Channels
Encryption AES-256, RSA-1024 key exchange
Rf Power 17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power)
Range Up to 750 ft, line of sight
Unicast Multicast Can connect one Transmitter to up to 6 Receivers
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Power
Power Input 2-Pin Circular locking Connector 6-28 VDC
Nominal Power Consumption 18 Watts
Environmental
Operating Temperature 0-40℃


    This will close in 0 seconds


      This will close in 0 seconds