Teradek Bolt XT 500 Dual Receiver Kit

ENQUIRE NOW

The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter. Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up.

  • 1 x Teradek Bolt XT 500 Transmitter
  • 2 x Teradek Bolt XT 500 Receiver
  • 2 x Teradek Wifi Antenna 2dBi 2.4/5.8GHz (RP-SMA)
  • 2 x Mains Power Supply to 2-Pin Lemo (9V)
  • 3 x 2-Pin Lemo to D-Tap Power Cable
  • 3 x Short BNC Cable
  • 3 x Short HDMI Cable
  • 2 x 7″” Noga Arm
  • 1 x 1/4″” Light Stand Adapter
  • 1 x USB A to Mini USB Cable
  • 1 x 1450 Peli Case

Video –
Video Inputs 1 x SD/HD/3G-SDI (75 Ohm BNC)
1 x Type A receptacle HDMI
Video Outputs 1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC)
Sdi Ancillary Data Support supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
https://support.teradek.com/hc/en-us/articles/217446087
Colour Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx <0.001sec (without format conversion)
Supported Resolutions-
Supported Resolutions 1080p 23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Video Processing –
Video Compression visually lossless
Colour Correction CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
Audio Processing-
Audio Compression 48kHz 24-bit PCM
Inputs-
Audio Input Embedded Audio Input
Physical-
Dimensions 24mm x 66mm x 101.5mm
0.95″” x 2.6″” x 4.47″”
Weight 226g
8oz
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with M3 and 1/4″” holes
3/8″” ARRI style accessory mount
Interfaces-
Http None
Configuration Interfaces None
Switches On/Off and Reset Switch
Desktop App Feature-rich Bolt Manager Application for OSX & Windows
USB Interface Functionality Upgrade via Mini-USB
Network-
Wireless Non-DFS Frequencies:
US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
EU & JP: 5.19 ~ 5.23 GHz
DFS Frequencies:
US: 5.27 ~ 5.55 GHz and 5.67 GHz
EU & JP: 5.27 ~ 5.67 GHz
Rf Channel Selection Auto only (NOT configurable)
Encryption AES-128
Rf Power 17dBm EIRP
Range Up to 500ft line of sight
Unicast Multicast Unicast / Multicast
Noise Rejection Can coexist with WiFi and 5GHz cordless phones
Power-
Power Input 2-Pin Connector 7-28 VDC
Battery None
Nominal Power Consumption 7.3 Watts (Measured at 1080p60)
Environmental-
Operating Temperature 0 ~ 40 deg-C
Bolt XT 500 SDI/HDMI Wireless RX
Video Outputs 1 x SD/HD/3G-SDI (75 Ohm BNC)
1 x HDMI Type-A receptacle
1 x USB 3.0 micro B receptacle
Sdi Ancillary Data Support supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
https://support.teradek.com/hc/en-us/articles/217446087
Colour Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx <0.001sec (without format conversion)
Supported Resolutions-
Supported Resolution 1080p 23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Video Processing-
Video Compression Visually lossless
Test Pattern Generator Support Yes
Colour Correction CDL/1024 1D LUT (supports 10-bit colour)
33x33x33 3D LUT (supports 10-bit colour)
Audio Processing-
Audio Compression 48kHz 24-bit PCM
Inputs-
Audio Input Embedded Audio Input
Physical-
Dimensions 152 x 86 x 25mm
6″” x 3.4″” x 1″”
Weight 299g
10.5oz
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Plastic Cap
Mountability Multiple mounting options with M3 and 1/4″” holes
Interfaces-
Http None
Configuration Interfaces OLED Screen with Menu Joystick Navigation
Switches On/Off and Reset Switch
Desktop App Feature-rich Bolt Manager Application for OSX & Windows
USB Interfaces Functionality Upgrade via Mini-USB
Network-
Wireless Non-DFS Frequencies:
US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
EU & JP: 5.19 ~ 5.23 GHz
DFS Frequencies:
US: 5.27 ~ 5.55 GHz and 5.67 GHz
EU & JP: 5.27 ~ 5.67 GHz
Rf Channel Selection Auto only (NOT configurable)
Encryption AES-128
Rf Power 15dBm Eirp
Range Up to 500ft line of sight
Unicast Multicast Unicast / Multicast
Nosie Rejection Can coexist with WiFi and 5GHz cordless phones
Power-
Power- Input 2-Pin Connector 7-28 VDC
Battery None
Nominal Power Consumption 9 Watts (Measured at 1080p60)
Environmental-
Operating Temperature 0 ~ 40 deg-C


    This will close in 0 seconds


      This will close in 0 seconds